HOW TO MINIMIZE MAYOR AND MINOR LOSES PIPE INSTALLATIONS SUPPORTING FOR FLUID WITH IMPROVE TRAP SYSTEM TO ACHIEVE INCREASING EFFICIENCY OF OUTPUT STEAM GENERATION

Sari

Steam system generation was very complexity, more than thousand installation and control one of the system was steam trap system, trap system installed in the trap discharge piping, visual inspection is the most positive method of testing Thermostatic Traps, and Traps modulatein operation. The discharge should be steady.Bucket Traps and Disc Traps cycle and the discharge should be intermittent. The trap is often discharging condensate above 212°F.When this high temperature condensate discharges to atmosphere flash steam may be present. Flash steam is normal and is not an indication of trap failure. Flash steam is a low velocity white colored discharge with a large stream of condensate. If the trap is
blowing live steam it will be at high velocity—a clear area will be present ahead of where the steam begins to condense. Also steam trap wuol be applied and shoul meet the requirements of the highly competitive combined cycle (CC) power plant, steam turbines (STs).